High-tech Energy-efficient Guest Rooms with TIS- Energy management in hotels is really a challenging issue for owners. From the desired temperature to their favorite light level, guests are more inclined to return for another stay when they can customize their room to match their preferences. However, providing these functions using old technology wastes a lot of energy. As an example, there are tons of difficulties with the old card key switches. Guests can put any card in the old switches, or they might ask for more than one card. Even though hotel desk refuses to give more than one card to a guest, she/he might claim to have lost the card.
The traditional old technology of hotel card switch. Additionally there is a lot of over usage of lights and AC energy due to things running even when guests aren’t inside their rooms, which could cause a financial loss for that owner. Obviously, no hotel owner wants to prohibit guests from possessing a comfortable stay, nor do owners expect guests to enter a dark or cold hotel room. No one is to blame. Both guests and hotel owners have the legal right to fulfill their interests.
Some hotel owners think if they separate the AC from the main network, less energy is going to be consumed, while some think that motion sensors are the solution. However, these approaches neglect to resolve the issue. The AC is easily the most energy-consuming device of all, and motion sensors may be nightmares because they only function according to movement detection, meaning that the AC and lights might go off while a guest is sleeping or reading a book. Nightmarish!
The TIS Automation Company supplies the best answer for hotel guest rooms by introducing its innovative technology in a smart ceiling sensor: Energy Servant. Our Energy Servant blows past classic hotel card switches with its capability to detect human presence in a room. This ceiling-mounted sensor has many options, together with a PIR motion sensor, a light harvest sensor, 2X digital inputs, infrared emitters appropriate for all split AC types, TV brands infrared codes, temperature sensor, 24X flags, and 32 lines of logic and timers.
TIS Energy servant, the brand new way for hotel economical technology. By installing this door sensor in the entrance to a room, connecting it for the Energy Servant’s digital input, and programming the logic lines, the issue of room occupancy is completely resolved.
The subsequent logics may be defined for this particular sensor to manage room energy with no discomfort for guests:
Logic 1: If there is any movement within the room, the occupancy mode will likely be on.
Logic 2: When the main door is opened and closed, a flag will activate for just one minute to ascertain if there is movement in room. If no movement is detected after 1 minute, the system will activate energy-saving mode. This is useful in situations whenever a guest enters the room briefly. In energy-saving mode all lighting is off with the exception of a nightlight, which stays on for 3 hours in case there is certainly another guest having a nap. Also, the AC is definitely not switched off, however its temperature is going to be decreased by 2 degrees. This can help save energy over time.
Logic 3: If the energy-saving mode is enabled and no movement is detected for over 3-5 hours, the nightlight and AC is going to be turned off automatically. It is also possible to define lower temperature levels for that AC. In addition, the Energy Servant can change the AC on/off if this recognizes that a balcony window/door is open. This requires is adding a magnetic contact connected to the balcony window/door and programming the required smart decision. The light harvest sensor helps save energy by wscgid balcony lights off if you have enough sun light.
Another practical and beneficial capacity for this sensor is its built-in thermostat, which will help retain the right temperature at all times. This is important to keep furniture fresh and intact. Also, in hot spots and even if the room is empty for a long period, humidity and bad smells will not turn into a problem inside the room. This sensor can be developed to alter AC to dry mode if the room temperature reaches or exceeds 28-30C degree. This may happen repeatedly during the day if needed. A comparable performance can be programmed in cold spots to prevent mold.
Another option of this smart system is TV control. If the hotel supplies the guest using a room tablet, she/he is able to control the room’s TV by using it. This sensor was set up in 20 rooms inside the Fairmount Blue Mountain Hotel in Sydney. The effect was considerably enhanced energy management and lots of satisfactory comments from guests who enjoyed their luxurious stay in this hotel.
TIS offers the ability to meet both hotel owners and guests interests and needs with just a few items and in by far the most energy efficient possible way. To learn more or even to schedule a consultation, call us at www.tiscontrol.com